7
DOOR REVERSAL INSTRUCTIONS
Before carrying out the operations described below,
pull out the mains plug from the wall socket.
To carry out door reversal operate as follows:
Remove the plastic cover (6) (which has a clip-in fit-
ting) masking the bottom hinge;
Remove bottom hinge (1);
Slide out the lower door from middle hinge (2) and re-
move the latter;
Slide out the upper door from pin (3), unscrew the lat-
ter and then screw it down into the hinge provided on
the opposite side;
Refit the upper door and the middle hinge on the op-
posite side;
Refit the lower door and bottom hinge (1) on the op-
posite side, after having removed the plugs (7) and
screws; these must then be refitted in the holes on the
opposite side;
Refit the plastic cover (6) on the bottom hinge.
Remove handles (4-5) and refit them on the opposite
side.
The holes that are not used are to be masked with the
plastic plugs removed.
Warning:
After having reversed the opening direction of the
doors, check that all the screws are properly tight-
ened.
Fig. 5
1
3
4
2
5
D074
6
7