background image

8

Loading your appliance

Before placing dishes in the machine, remove any
scraps of food, to avoid clogging the filters and
consequently reducing the performance.

Do not load very small items which can fall 
through the baskets.

The lower basket

The lower basket is designed to take saucepans, lids,
plates, salad bowls, cutlery etc.

Serving dishes and large lids should be arranged
around the edge of the basket, ensuring that the upper
spray arm can turn freely.

The cutlery basket

Long bladed knives stored in an upright 
position are a potential hazard.
Long and/or sharp items of cutlery such as 
carving knives must be positioned 
horizontally in the upper basket.
Take care when loading or unloading sharp 
items such as knives.

Cutlery should be placed in the removable cutlery
basket with the handles facing downwards.

If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards.

Mix spoons with other cutlery to prevent them from
sticking together.

Arrange spoons, dessert spoons, teaspoons, knives
and other small items of cutlery in the rack on the side
of the cutlery basket.

CES43en

Using your appliance

UI67

UI27

UI66

Summary of Contents for CDW 101





























Reviews: