background image

3

Installation

This appliance is heavy. Care should be taken when 
moving it.

It is dangerous to alter the specifications or attempt 
to modify this product in any way.

Care must be taken to ensure that the appliance 
does not stand on the electrical supply cable.

Any electrical work required to install this appliance 
should be carried out by a qualified electrician or 
competent person.

Any plumbing work required to install this appliance 
should be carried out by a qualified plumber or 
competent person.

Child Safety 

This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the 
controls or play with the product.

Keep all packaging well away from children.

Keep all detergents in a safe place out of children's 
reach.

During Use 

Items that are contaminated by petrol, paint, steel 
or iron debris, corrosive, acidic or alkaline 
chemicals must not be washed in this dishwasher.

Under no circumstances should you open the door 
whilst the appliance is in operation. Always turn off 
the appliance before opening the door.

Only use detergent specifically designed for use in 
dishwashers.

Long bladed knives stored in an upright position are 
a potential hazard.

Long and/or sharp items of cutlery such as carving 
knives must be positioned horizontally in the upper 
basket.

When finishing loading or unloading close the 
door, as an open door can be a hazard.

Do not sit or stand on the open door.

Isolate the appliance from the power supply and 
turn off the water supply after use.

Care should be taken when cleaning the bottom 
door seal and hinge area as any exposed metal 
edges may cut if care is not taken.

This product should be serviced by an 
authorised Service engineer, and only genuine 
spare parts should be used.

Under no circumstances should you attempt to 
repair the machine yourself. Repairs carried out 
by inexperienced persons may cause injury or 
serious malfunctioning. Contact your local 
Service Force Centre. Always insist on genuine 
spare parts.

Conservation 

In the interest of the environment:

Materials marked with the symbol 

are 

recyclable.

Check with your local Council or Environmental 
Health Office to see if there are facilities in your 
area for re-cycling this appliance.

When the appliance is to be scrapped, cut off 
the power supply cable and make the door 
closing device unusable to prevent young 
children from being trapped inside.

Help to keep your country tidy - use authorised 
disposal sites for your old appliance.

AVV01en

Important safety information

It is most important that this instruction book should be retained with the appliance for future
reference. Should the appliance be sold or transferred to another owner, or should you move house
and leave the appliance, always ensure that the book is left with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before
installing or using the appliance.

Summary of Contents for CDW 087





























Reviews: