7
After the machine has started, only the running phase
pilot light stays on.
When the pilot light “
wash
” comes on this means that
the machine is performing the washing phase. If you
have selected the “prewash” function, this light will be
on during the prewash phase too.
The “
end
” pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something not
working”.
The “
door
” pilot light indicates if the door can be
opened:
- light on: the door cannot be opened
- light off: the door can be opened
- flashing light: the door is opening
It stays on during the whole programme indicating that
the door is locked.
When the light goes out, the door can be opened (see
page 9).
8 Programme selector dial
The selector dial is divided into 2 sections: red and
black.
The selector dial can be turned either clockwise or
anticlockwise.
Position
O
corresponds to to Reset programme /
Switching OFF of the machine.
1
4
5
6
7
8
2
3
10
13
9
15
12
14
11
PROGRAMME
wash
rinses
spin
end
door
ATTENTION!
If you turn the programme selector dial to an other
programme when the machine is working, the lights of
the programme progress display start to flash. The
machine will not perform the new selected programme.
Programme information
The wool wash cycle of this machine has been approved
by Woolmark for the washing of machine washable
Woolmark products provided that the garments are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washing machine. M9604.
This is a complete programme to be used for lightly
soiled laundry or for laundry which needs freshening up
(not available for wool).
Max load: 2. kg .
Washing temperature: 30°C
Number of rinses: 2 .
Programme duration: 30 minutes.
Short spin at 700 r.p.m max.
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
short spin at the maximum speed that can be reduced
lected by means of the relevant button.
For emptying out the water of the last rinse in programmes
with the “rinse hold” option.
Turn first the programme selector dial to
O
, then select
drain programme
14
and depress the “start pause” button.
Separate short spin for hand washed garments and after
programmes with “rinse hold” option. Before selecting
this programme the selector dial must be turned to “
O
”.
You can choose the speed by means of the relevant
button to adapt it to the fabrics to be spun.
15 = Spin
14 = Drain
13 = Rinses
12 = Quick and Cool
10 = Wool
132994650.qxd 6/25/02 10:19 AM Pagina 7 (Nero/Process Black pellicola)
