Link LED: This LED will blink once it is connected to receiver via the CAT6
cable. The LED will stop blinking and stay illuminated to indicate successful
HDMI transmission.
Power LED: This LED indicator will illuminate when the 5VDC power supply
is plugged into a wall outlet and connected to the transmitter. The LED will
blink during the initial power-up time.
HDMI Input: Connect an HDMI cable between this input port and the HDMI
output port of your source equipment.
IR Input & output: Connect IR emitter & receiver cables (included) to these
ports. Place the eye of the emitter within the range of the source equipment.
Place the eye of the receiver in front of the sink, then use the existing remote
to control the equipment.
Power Input: Connect the 5VDC power supply to this input. Then connect the
adapter to an AC outlet.
RJ45 Output: Connect a CAT6 cable terminated with a CAT6 RJ45 modular
plug into this port.
4. Operation Controls and Functions
4.1 Transmitter (TX) Unit
4
3
1
2
3
4
5
6
2
4
5
6
1
3
ELEC-HX1C6-LITE_manual 2013.indd 4
10/7/13 1:47 PM
