‘LIFE TASTES GOOD’
GLOBAL COMPANY
Boundary appears in juice.
Spilled out on the
appliance body.
After the extraction, the
parts and bowl color are
changed.
⻱
There might be a boundary in juice because of material’s density after extraction.
erent from high speed extraction so that juice is normal condition.
⻱
It might happen if the pressure silicon is not assembled properly.
Please check if pressure silicon is assembled properly.
⻱
cult to clean as
well as the reason of the performance resistance.
⻱
ect the color of
rst and then use soap.
⻱
Dissemble silicones from wiper and you are able to wash them separately.
Status
Check list
Juice is spilled out on
the appliance body.
After extraction, the
color of the Juicing
parts and Juice Container
are changed.
- It may happen if the Pressure Plug is not assembled properly.
Please check if pressure plug is assembled properly.
clean and may even result in performance resistance.
and warm water.
- Disassemble Silicone Wiping Blades and wash them separately.
Fruitstar Juicer Registration
Tribest Corp.
P.O. Box 4089
Cerritos, CA 90703
U.S.A.
Place
Stamp
Here
Q&A
When motor stops in
middle of using.
Amount of juice is little
Juicing bowl is shaking in the
middle of operation.
Seems like juicing screw is
grinding.
Hearing a lot of noises.
⻱
Check if the cord is plugged properly
⻱
Check if all parts are assembled correctly.
⻱
It might not work if lots of materials are inserted at the same time.
⻱
When appliance stops in middle of operation then turn the switch to “OFF” and
press “REVERSE” switch to unclog the materials in the juicing screw. Then press
the “FORWARD” switch to push the materials down the screw. (Repeat the steps 3
times)
⻱
Turn the switch to “OFF” and place the motor around cool temperature area. Let
appliance rest for an hour in order to work again.
⻱
When using the materials with the hard seed in it, please remove all the seeds in
the materials to use. It may break down the juicing strainer.
⻱
erent amount of juice depends on how fresh they are.
⻱
To extract more juice out of the refrigerated materials, put it in the clean water and
wait until the materials are most enough to be extracted.
⻱
ber which it is hard to extract, to get a best result extract carrot
ber materials. Such as, pears and oranges. Please cut the
carrots into quarterly to get a best result.
⻱
Check if the pressure silicon is assembled properly.
⻱
When you extract a lot of amount juice with seeded fruits, wash the bowl in the
middle of extraction.
⻱
It is completely normal that juicing bowl is shaking little bit in operation.
⻱
Juicing screw and strainer is stick together, so do not operate for a long time when
there is nothing to be extract.
⻱
Turn the switch to “OFF” then check if the parts are assembled properly.
⻱
Check if the appliance is on uneven surface.
⻱
There might be friction noise while in use. This is the sound of wiping in the juicing
bowl. After inserting materials, noise will disappear.
⻱
Check if materials are cut in right portion.
Status
Check list
Motor stops during use.
Amount of juice is
too little.
Juice Container is
shaking in the middle
of operation.
Seems like Vertical
Auger is grinding.
Hearing a lot of
sounds coming from
the machine.
- Check if the power cord is plugged in properly
- Check if all parts are assembled correctly
- It may not work if lots of juicing materials are inserted at the same time.
- When appliance stops in the middle of operation then turn the switch to “OFF”
and press “REVERSE” switch to unclog the materials in the Vertical Auger. Then
press the “FORWARD” switch to push the materials down.
(Repeat this step 3 times)
- Turn the switch to “OFF” and place the Main Body in a cool area. Let appliance
rest for an hour to cool down the motor and work again.
- Remove all the hard seeds in the juicing materials before juicing. Hard seeds
may break down the juicing screen.
- To extract more juice out of the refrigerated materials, soak foods in clean
water before juicing.
- Check if the Pressure Plug is assembled properly.
- It is completely normal if the juice container is shaking a little bit during
operation.
- Turn the switch to “OFF” then check if the parts are assembled properly
- Check if the appliance is operating on an uneven surface.
- There may be squeaky friction noise while in use. This is a normal sound that
occurs, and user should not worry about it.
- Check if juicing materials are cut in the right sizes.
- Vertical Auger and Juicing Screen are stuck together, so do not operate for a
long time without feeding any foods.
Troubleshooting
TROUBLESHOOTING
