Tribe POLAR700, User Manual

Page: 10 / 36

8
POLAR700
3.4 MENU STRUCTURE
MENU
1
DMX Personality and
Starting Address
2 CH
ð
d1 - d512
Selects DMX personality and DMX starting
value
5 CH
ð
d1 - d512
8 CH
ð
d1 - d512
2 Auto Programs P--
ð
P1 - P8 Selects 1 of 8 auto programs
3 Programs Speed
S--
ð
S1 - S100 Sets auto program speed (slow to fast)
4 Static U--
ð
d0 - d255 Dimmer (0-100%)
ð
S0 - S255 Strobe (0-100%)
5 Sound Active Snd Sound Active mode
6 Sound Sensitivity SenS
ð
u0 - u100 Sets sound sensitivity (low to high)
7 IR Setting SET
ð
ON Turns on, controller IR
ð
OFF Turns off, controller IR
8 Temperature test teMP
ð
60 Temperature
3.4 AUTO SHOW
This fixture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows P-- , then press the button ENTER.
• Using UP/DOWN button, select one of the programs ( P0 - P8 ).
• Press the button ENTER save the setting.
3.5 SHOW SPEED
To set the show speed refer to the following steps:
• Press the button MENU so many times until shows S-- , then press the button ENTER.
• Use the UP/DOWN buttons to set the desired value ( S1 - S100 ).
• Press the button ENTER save the setting.
3.6 STATIC MODE
To set the custom show refer to the following steps:
• Press the MENU button until the display shows U-- , then press the button ENTER.
• Select the intensity of the strobe d or the speed of the strobe S through the ENTER button.
• Use the UP/DOWN buttons to set the desired value ( 000 - 255 ).
• Press ENTER to confirm and move to the next selection.
• Continue until you get your desired effect.