Tribe LUMIPIX15IP, User Manual

Page: 5 / 40

3 LUMIPIX15IP
- 1 - INTRODUCTION
1.1 DESCRIPTION
LUMIPIX15IP is a tour-ready LED pixel batten conceived to be fully versatile and perform outdoor, deliver-
ing advanced brightness and colour mixing by offering individual pixel control of each cell. The robust
die-cast aluminium structure with omega quick lock socket on the bracket and the waterproof power and
signal connector make LUMIPIX15IP suitable for the most demanding environments.
1.2 TECHNICAL SPECIFICATIONS
LIGHT SOURCE
• Source: 15x10W RGBW LEDs
• Luminous flux: 3587lm
• Lux: 4771lux @3m full
• Source life expectancy: >30.000 h
OPTICS
• Beam angle: 16°
• Field angle: 30°
• Additional optics: Magnetic Frost holder on board
COLOUR SYSTEM
• Colour mixing: RGBW/FC
• CTC: CTC control through independent DMX channel
• White presets: 2800-10’000K
• Colour wheel: virtual colour wheel with presets
• Macros: several pre-build pixel macros with adjustable speed
DYNAMIC EFFECTS
• Pixel patterns: pre-programmed dynamic and static patterns
• Static colour mode: selection of static colour
• Manual colour mode: manual adjustment of colour
BODY
• Hardware on-board: OMEGA sockets for quick rigging (clamp included)
• Body: sturdy die-cast aluminium body conceived for long-time durability
• Body colour: black
CONTROL
• Protocols: DMX512
• DMX channels: 4/6/10/60/65channel
• Pixel control: pixel2pixel control
• W-DMX: included, wireless solution receiver
• Display: black OLED high resolution display
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/Slave: for synchronized operation of more units linked in a chain
ELECTRONICS
• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: 4 different dimming curves available
• Strobe / shutter: 0~30 Hz, electronic
• Battery backup: battery backup for user operation without connecting to the main power
• Operating temperature: -10° ~ +45°