Tribe JETBEAM2, User Manual

Page: 12 / 48

JETBEAM2
10
3.7 DMX MODE
The JETBEAM2 has more DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select
DMX Mode
and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the mode and press ENTER to confirm
your choice.
• Press the MENU button repeatedly to exit the menu and save changes.
The unit is equipped with 3/5-pole XLR connections.
3.8 DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to JET-
BEAM2. To able to operate the JETBEAM2 with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the JETBEAM2. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
19 33 33-52 53 72 91
21 33 33-54 55 76 97
28 33 33-61 62 90 118
3.9 FIXTURE SETTINGS
Fig.6 - Example 21 DMX channels configuration
DMX Address: 96 DMX Address: 54 DMX Address: 33 DMX Address: 75
. . . . . . . . . . . .
DMX512 Controller