Tribe BATGOBOIR, User Manual

Page: 8 / 20

BATGOBOIR
6
- 3 - FUNCTIONS AND SETTINGS
3.1 OPERATION
The BATGOBOIR has an external auto-ranging DC8,4V 1000mA power supply.
This device comes with a rechargeable lithium battery for cable-free operation. To charge the battery,
simply plug in the external power cord at any time before, during, or after operation. To charge the battery
before or after operation with the LED off, leave the power switch in the Off position. The indicator light
on the external power supply turns red while the battery is charging, then it turns green when the battery
is done charging.
For optimal battery life, charge the BATGOBOIR battery 24 hours prior to initial use.
The maximum operating time varies from 5 to 16 hours depending on the intensity of the light used; the
charging time of the battery is 6 hours.
3.2 OPERATION THROUGH THE IRC CONTROLLER
To control the BATGOBOIR with the infrared remote control make sure to point the controller directly at
the receiver on the product.
Miscellaneous Operation
To adjust the brightness of the BATGOBOIR:
• Press + or – to increase or decrease the intensity of the light beam.
• Press W to show maximum brightness.
To black out the lights:
• Press BLACK OUT on the controller.
• This will turn off all the lights until the button is pressed again.
NOTE - The controller will not respond to any inputs when Black Out is activated. If the remote does not
respond when a button is pressed, try pressing BLACK OUT. You may have inadvertently activated BLACK
OUT.
Fig.3
IRC REMOTE
BLACK
OUT
AUTO
STROBE SPEED
SOUND
SENSI-
TIVITY
%
MANUAL
FADE
SNAP
R G B
+ 0
1 2
3
4
5 6
7 8 9
A
UV W