Triax TR 212, Operating Manual

Page: 24 / 48

24
If the Time Mode is set to Auto then, Time Zone
shall be active for editing. If the Mode is Manual
these options shall be disabled.
If the Time Mode is set to Manual then, Date
and Time shall be active for editing. If the Mode is
“Auto” these options shall be disabled.
In this option, Auto Search in Standby can be
turned on or off.
This will restore all “Default Settings” The system
will prompt the user to input a password (default
“0 0 0 0 “) to activate “Factory Reset”.
Refer to SOFTWARE UPGRADE Section on page
37 for details.
Auto Search in Standby
Factory Reset
Upgrade
Displays the Receiver Information.
This is shown below.
This shows the system information, including the
H/W Version, S/W Version, F/W Version, Build
Date and Time, Model Number and Helpline
Number. Press the ‘BACK’ key to return to the
previous menu.
Enables/Disables the “Auto Standby”. The user
can select 1 Hr, 2Hrs or 3 Hrs, (Default setting
is 3 Hrs). If the receiver receives no commands,
either from the Remote Control or Front Panel
buttons, for the set time, the receiver will
automatically Enter standby. This feature can be
disabled, in the menu, if required.
Version
Auto Standby