User Manual TOST and TOCT
307790 – 307791
Release 1.1
Configuration of the module
Select LNB Type:
With this switch you can select the frequency range of the Sat input signal. This is necessary to make
the Automatic Slope Control (ASC) work properly. If signals of a Quattro LNB are inserted, then set
the switch to "Q". If Wideband signals are inserted, set the switch to "WB".
Select # splits (only for TOCT):
With this switch you can select the number of splits in your system, this is necessary to make the
Automatic Gain Control work properly.
18V 2A
Power Supply
