Programmable Multiband Amplifier
TMB 200 & TMB 200S
3
awi -july 14
TMB 200-V1
We recommend you install the unit in a sufficiently ventilated place.
Natural ventilation must be able to occur through the ventilation grids;
leave a minimum space of 15 cm around the unit to ensure maximum
ventilation. When installing or cabling the unit,
we recommend you
disconnect the
mains power cable.
Connecting the unit
Note:
UHF inputs are remotely supplied and protected against short circuits. The power available is 12 or
24V, 80mA max.
Output
Inputs BI-FM BIII
UHF
USB Interface
Earthing
connector
