General Settings Administration
41
10. Select the
Replace
all radio button to update all of
the headend‟s
firmware, i.e. modules, system controller and user interface.
(Recommended)
11. Select the
Update old packages
radio button to only update
outdated modules.
12. Press the
Start update
button.
Note:
The
Update old packages
radio button should only be used in cases
where the headend consists mainly of new modules, but also contains
some older modules that might benefit from an update.
The firmware update takes approximately 5 minutes, during which time
upgrade information is displayed in the Status area.
13. Press the
Restart
button when the firmware update has
completed.
Note:
Service distribution to end-users will be disrupted while the headend
restarts.