5. Secure the camera with the
supplied screws.
6. Route the cables through the cable
hole.
7. Connect the video output connector
to the monitor. Connect the power
connector to the power supply.
8. Adjust the image and focus.
9. Install the black liner to the back of
the camera.
10. Align the lower dome to the
mounting base and fix it by
tightening the screws.
3. Image and Focus Adjusting:
3-Axis adjustment
1. View the camera image using the
monitor.
2. Rotate the panning table to adjust
the panning position of the camera.
3. Push the dome drive forward or
backward to adjust the tilting
position of the camera.
4. Rotate the lens table to adjust the
azimuth angle of the image.
Zoom and Focus adjustment
1. View the camera image using the
monitor.
2. Loosen the zoom lever and move
the lever between T (Tele) and
W (Wide) to obtain the appropriate
angle of view.
3. Tighten the zoom lever.
4. Loosen the focus lever and move
the lever between F (Far) and N
(Near) to obtain the optimum focus.
5. Tighten the focus lever.
For detailed instructions please visit
www.triax.co.uk
