Introduction
4
Service tool
1. Open a web browser window.
2. Enter ‘http://192.168.0.100’ in the web address field.
3. Press Enter.
4. Enter the password.
5. Press the Log in button.
Note:
Password = ‘triax1234’ when the service tool is opened for the first time.
The Keep me logged in checkbox overrides the system’s automatic time out
function, which is activated after 20 minute’s inactivity.
Overview
Icons
Indicates whether the service tool is communicating correctly with the headend unit.
Green
The service tool and headend are communicating correctly.
Red
The service tool and headend are NOT communicating correctly.
Indicates whether the headend unit is functioning correctly.
Communication
icon
System icon
Configuration
buttons
Tabs
Misc. Buttons
Introduction
5
Green
The headend unit is functioning correctly.
Red
The headend unit is functioning correctly.
Tabs
Accesses the various tabs used to configure the headend’s input and output
modules.
System
The service tool’s ‘home’ window. Provides system overview
information and configuration activation/control.
Input
Tab for configuring input modules and services.
Refer to input module manuals for information.
CA Modules
Tab for configuring CI modules and CA cards.
Refer to output module manuals for information.
Output
Tab for configuring output modules and services. Refer to output
module manuals for information.
Network
Tab for defining customer specific settings that are network
related, e.g. Network name, ID, and for defining HD/SD channel
numbering.
Channel List
Tab for viewing the channels being transmitted from the
headend, as defined in the Input, CA Modules and Output tabs.
Refer to input module manuals for information.
Misc. Buttons
Apply
Stores configuration settings on the SD card located in the
headend.
Button colour
Red There are changes that have not been stored on the
headend’s SD card.
Grey All changes are stored on the headend’s SD card.
Log In/Out
Service tool access control.
Admin.-
Opens the settings for service tool window, where language,
location, time zone, and initial IP addresses are specified.