16
17
©2015 by Triax Technologies Inc. - All rights reserved
After you have turned on your SIM™, carefully insert it into the pocket
built into the headband / skullcap.
The headband (or skullcap) must be worn correctly to ensure accurate and consistent impact
measurements. First, insert the SIM-G into your headband/skullcap antenna-first so that the
serial number is facing towards you (i.e. you should be able to see the white sticker). This is
so that when the device is being worn on your head, the power button will not accidentally
be pushed and turned off during play. It should be worn so that the enclosed SIM™ sensor
module is positioned at the back of the head and at the base of the skull, so that green is to
the grass, blue is to the sky, as shown below:
Important handling notes:
Use care in handling the flex-tail (antenna).
It is rugged, but should not be considered a
“handle”.
For proper operation and maximum wireless
range, the antenna must always be extended
– never folded or bent.
The SIM™ is sealed against moisture and
perspiration that would occur during typical
use. It is NOT designed to withstand a trip
through a washing-machine or clothes-
dryer cycle, and these activities will
invalidate the warranty.
17
©2015 by Triax Technologies Inc. - All rights reserved
