Triax HDA 1x2S, Operating Manual

Page: 6 / 12

1. HDMI Input: Connects the input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top box.
2. Power LED: The power LED will illuminate when power is on.
3. Power: Plug the 5V DC power supply into the HDA 1x2S and connect the
adapter to a mains socket and switch on.
1. EDID Control Switch:
The Default EDID setting is set to TV, if the display shows the correct aspect ratio then it is
formatted correctly. If the display has not set to the correct aspect ratio then switch to the STD
setting to use the built-in EDID generator. When the EDID control is switched to TV setting, the
unit will detect the first HDMI output source’s EDID and record it, it will default to the lowest
aspect ratio that all TV’s can view. If the first detected output source is DVI it will pass to next
source, until the first HDMI Source has been detected.
Note: To validate the EDID Control setting the HDA 1x8S needs to be re-booted by a mains
reset.
2. HDMI Outputs:
When more than one output is connected, the HDMI outputs play identical video signals
simultaneously and the same image will be displayed on ALL TV’s.
3. CEC Reset (SYS reset):
Switched to “ON” position, the system will send the internal CEC Command to the display
within 8~10 minutes to force all the displays to switch back to HDMI 1 Source (Default). If the
“OFF” position is selected the source CEC Command will not function and the TV’s continue
to display the local HDMI Source.
6
1 2 3
1 2 3
Operation and Control
Rear Panel - HDA 1x2S
Rear Panel - HDA 1x8S
HDMI Out HDMI Out HDMI Out HDMI Out HDMI Out
On Off
SYS.Reset
STD TV
EDID
HDMI Input
DC 5V
Power