- 26 -
CGT 660
Reducing the value of "number 1".
—> If the station filter is switched on ("
on
"), "number 1" can be re-
duced. To do this, observe "number 2" for 30 seconds and note the
highest value. Add roughly 10 % to this value. Do not reduce the
value of "number 1" to a value less than that of "number 2".
If the value of "number 1" is less than that of "number 2" , question
marks "
??
" will appear in the display.
Bx 1A
/B
SR=6200 (6531) ??
STUFFING
• Press the
button.
—> The "Substitute signal in the case of an incorrect input signal" –
"
FAILURE
" is activated.
s
ubstitute
signal
in
the
Case
of
an
inCorreCt
input
signal
You use this menu to set whether a "
Null Packets
" QAM signal or a "
Single
Carrier
" signal should be provided as an output signal whenever an incorrect
input signal occurs.
Bx 1A
/B
Null Packets
FAILURE
•
Use the
buttons to set the output signal required.
• Press the
button.
—> The "Network Information Table" – "
NIT
" menu is activated.
