Triax CG2CT 860 C, Assembly Instructions Manual

Page: 27 / 36

- 27 - CG2CT 860 C
o
ption set tings
In this menu you select the channel strip for which you would like to do the
option settings in the related submenus.
Bx 2
A OPTIONS
=>
—> In order to skip the "Option settings", press button .
• Using the buttons select the desired channel strip.
• Press button .
—> The "Transport stream ID and ORGNET-ID" – " TS/ONID " submenu
is activated.
t
r ansport strea m
id
and
orgnet-id
If the stations of a transponder are split into the transport streams of several
channel strips, a new identification must be allocated to the further transport
streams to realise the channel search of the settop boxes connected without
mistakes.
—> If the ORGNET-ID is changed also a new NIT must be generated
(page 31).
Bx 2A /B
0x0001,0100
TS/ONID
off
• Use the buttons to position the cursor under the digit of the hexadeci-
mal number to be set.
• Press to set the respective digit of the hexadecimal number.
• Repeat the procedure by the quantity of the digits to be set.
• Using the button place the cursor under " off " and switch " on " the trans-
mitter identification using the buttons.
—> By pressing the button you return to the hexadecimal number
setting.