- 15 -
CG2CT 860 C
s
eleCting
the
module
/
Channel
strip
• If necessary, press
repeatedly to select the particular module (
Bx
…)
to be programmed.
Bx 2
QAM
2xT2C2
V8
………
………
Bx 3
………
………
………
/
—> The display shows, e.g., the
Bx 2
2xT2C2
QAM
V 8
menu.
"
Bx 2
"
indicates the slot no. 4
"
2xT2C2 QAM"
type of the module
"
V 8
"
software version of the module
• Press the button.
—> The "Output parameter" – "
OUTPUT
" main menu is activated.
o
utput
par a meter
In this menu you select the modulator for which you would like to do the output
parameter settings in the related submenus.
Bx 2
Mod A
OUTPUT
C66 =>
—> In order to skip the "Output parameter settings", press button
.
—> For example an indicated "C66" shows the current channel set. If
"C – –" is displayed a frequency which does not correspond to the
DVB-C channel-/frequency grid was set.
• Using buttons
select the desired modulator.
• Press the button.
—> The "Modulator on/off, Level" – "
LEVEL
" submenu is activated.
