![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864020.webp)
- 20 -
CCS-2 1002
o
utPut
frequenCy
, o
utPut
Channel
, m
odul ator
In this menu, dependent on the setting before, you set the output frequency
(42.0 … 860.0 MHz) or the output channel (C05…C12, C21 … C69) of the
channel strip. Additionally the modulator of the channel strip can be switched
off or on.
Bx 4A
/B
850.00 MHz
OUTPUT
on
or
Bx 4A
/B
C68
OUTPUT
on
• Use the
buttons to position the cursor under the digit to be set for
the frequency or channel display then use
to set the desired output
frequency or channel.
• To switch off the modulator place the cursor under "
on
" using the button
and switch "
off
" the modulator of the channel strip using the
buttons.
—> The switched off modulator is indicated by "
- - -
" in the display.
• If the modulator is switched "
off
" use the
to switch it "
on
".
• Press the
button.
—> The "Output levels of the channel strips" – "
LEVEL
" menu is activated.
a
djusting
the
outPut
levels
of
the
Channel
striPs
This menu item is used to set the output levels of the modulators of the
channel
strips "A" and "B" to the same value
.
Bx 4A
/B
-3 dB
LEVEL
• Measure and note down the output level of the channel strip. To adjust the
output level to the output levels of the other cassettes please pay attention to
chapter 6 "Final procedures" (page 43).
• By repeatedly pressing the
button scroll back to the "Selecting the
channel strip" menu.