- 18 -
- 18 -
• Press the
button.
—> The sub-menu “Modulator settings” –
“
OUTPUT: Modulator
” is activated.
Modulator settings
• By pressing the
buttons, switch the modulator
(HF output) “
on
” (default setting) or if necessary switch it
“
off
”.
• Press the
button.
—> The menu “Setting output level of the channel strips“ –
“
OUTPUT: LEVEL HF OUT:
” is activated.
Setting output level of the channel strips
• Press the
button.
—> “
OUTPUT: LEVEL
CONTROL
” appears in the display.
Note:
In this mode a digital carrier is set to the analogue picture
carrier frequency of the output channel of the respective
channel strip. Thus you can measure the absolute output
level using a analogue test receiver.
Bx 1A
Modulator:
OUTPUT:
on
on / off
Bx 1A
LEVEL HF OUT:
OUTPUT:
0
0
…
-7
Bx 1A
LEVEL
CONTROL
OUTPUT:
