![background image](http://html1.mh-extra.com/html/triax/325018/325018_assembly-manual_1160860009.webp)
- 9 -
CGMM 480 / CGMS 480
5
p
rogramming
5.1 p
repar ation
• Connect the test receiver to the RF output on the modulator module.
• Adjust the test receiver to the output channel of the channel strip to be set.
• Switch on the modulator if necessary. For each modulator, there is a green
LED which indicates if the modulator is switched on.
LED – Channel strip “A“
LED – Channel strip “B“
LED – Channel strip “C“
LED – Channel strip “D“
To use the CGMM 480 OIRT module the head-end station CSE 2800 must be set
to OIRT operation mode.
Therefore in the setup menu of the control unit
• press the button twice.
—> The “Setting the Standard” - “
NORM
” menu is activated.
• Switch to standard “PAL DK” using the button.
• Press the button.
—> The “Saving Data” - “
MEMORY
” menu is activated.
• Store the setting using the button.
—> Always all modulator modules are set.
Mixed operation is not possible!
To operate the
CGMM 480 OIRT
module the software version of the control unit
(head-end station) must be “V 9” or higher.