⚫
In built automatic downscaling to 1080p to support legacy displays.
⚫
Visually Lossless Compression (VLC) technology with no latency.
⚫
EDID pass through
⚫
Compact design, easy to install and simple to operate.
Products included
⚫
1x Transmitter (TX)
⚫
1x Receiver (RX)
⚫
1x IR Receiver
⚫
1x IR Emitter
⚫
1x Power Adaptor (12V DC, 1.25A)
⚫
1x User Manual
Transmitter Panel Description
1. CATx OUT:
RJ45 port connects the CATx cable, from the transmitter, to the RJ45 port of receiver by
CATx cable. The orange LED illuminates when there is a valid HDMI signal input. The green LED
illuminates when power is applied.
2. IR IN:
3.5mm mini jack to connect IR receiver for IR pass-through.
3. IR OUT:
3.5mm mini jack to connect IR emitter for IR pass-through.
4. DISPLAY:
Type-A female HDMI port to connect HDMI display device.
5. SOURCE:
Type-A female HDMI port to connect HDMI source device.
6. DC 12V:
DC connector for the power adapter connection.
7. EDID Management:
Press the button with paper clip or other sharp tool to set EDID bypass mode, or
press and hold it for 3 seconds to copy the EDID from the display device.
Note:
Press and hold the button while power is off, then power on, release it after 5 seconds to
restore the default setting: The source device learns EDID from the TV which has the lowest
resolution.
