Seite
38 von 72
• Antenna Setup
a.) I
nstructions for setting "Permanently fixed antennas"
Satellite: Satellite selection.
The satellites are listed, which
are activated in the sub satellite list. Select to edit satellite
.
L
NB frequency: for the selected satellite set the LNB fre-
quency. Choose Universal or Unicable (SCR). Default set-
ting is universal.
Unicable:
A new window will open.
With IF Channel you can set the corresponding channel, at
Centre Freq. you can set the corresponding frequency .
Example: The first receiver is given IF Channel 1 and fre-
quency 1076 MHz.
The channels and the corresponding frequencies are speci-
fied by the SCR devices (LNB, multiswitch)
Transponder:
list of programmed transponder
.
DiSEqC1.0:
adjustment for multiple satellite reception
22K:
Automatically set by the receiver
.
Polarisation:
default setting is "AUTO". However, horizontal
or vertical LNB supply voltage can be set.
.
b.) instruction for setting
„Rotator Antenna“
(Antenna with rotator)
LNB Typ:
Set the selected satellite, the corresponding LNB
frequency. Default setting is universal.
Motor type:
Sets the type of rotator
.
local length/width:
Only when "USALS" is selected in Item
rotator type
Summary of Contents for 305030
