3
6. Use Table 1 to proper set the leg dimensions for
the appropriate boiler. As shown in Fig. 8.
Table 1:
7. Use (4) Retaining Clips Style A to lock the Leg
Component assemblies as shown in Figure 7.
Boiler Mounting
Prior to mounting the boiler onto the stand it
is advisable to pre-pipe the near boiler piping
and near gas piping.
Ensure the stand is level – adjust the leveling
feet as needed. Ensure all component assem-
blies are secure with retaining clips. Failure
to comply could result in a collapse of the
stand resulting in property damage or severe
personal injury.
Use care not to lift the boiler from, or place
the boiler on the front plastic control panel as
damage can occur. Use care not to drop,
bump or rotate the boiler upside down, as
damage to the boiler will result.
WARNING
CAUTION
BEST PRACTICE
Prestige Floor Stand
Fig. 5: Completion of Leg-Components to
side Frames
Fig. 6: Rail Component to Side Frame
Assembly
Boiler Model
Left to Right
Distance
Dimension”a”
Front to Back
Distance
Dimension”b”
Prestige Solo 60/110
20 inches
16 inches
Prestige Solo 175/250
20 inches
16 inches
Prestige Solo 399
20 3/4 inches
20 3/4 inches
Prestige
EXCELLENCE 110
20 3/4 inches
20 3/4 inches
