background image

HMG Delta CLASSIC Replacement Kit

Electronic Spark Ignition

1

Kit Part Numbers: PGRKIT25

Parts List

1- Series 1 Pilot Hood/Bracket Assembly
2- Series 2 Pilot Hood Assembly
3- Ground Rod
4- Ground Rod Sleeve
5- Ground Rod Sleeve Retainer Nut
6- Electrode
7- Pilot Orifice
8- 3/4” Spacer
9- Machine Screw
10- Nut
11- 3/8” Spacer
12- Lock Washer
13- L-Key Wrench
14- Retaining Screw

Indicates a potentially hazardous situation
which, if ignored, can result in serious
injury or substantial property damage.

Indicates special instructions on installa-
tion, operation or maintenance, which are
important to equipment but not related to
personal injury hazards.

NOTICE

WARNING

1

2

4

5

7

3

6

11

13

12

10

9

14

8

Failure to follow instructions below can result
in severe personal injury or damage if ignored.

Instructions are for a qualified installer/ ser-
vice technician.

Read all instructions before proceeding.

Follow instructions in proper order.

For your safety, turn off electrical power
supply at service panel before proceeding to
avoid possible electrical shock hazard.
Failure to do so can cause severe personal
injury or death.  

WARNING

WARNING

Summary of Contents for PGRKIT25







Reviews: