Triangle Lights LED PAR 64 6CH LCD 181 LONG User Manual Download Page 5

Page: 5 / 5

www.storexp.com

7 Trouble-Shooting

3 of the leds are not working when I received the lights.

LEDs are soldered to the led board and they work in sets of 3. If one solder point get loosen due to impacts

in transit, it will bring down the other two in the group. Fixing this is easy if you have a solder iron.

Open the case, locate the 3 leds that are not working, and go to the other side of the led board where you

see the connections.

Plug and light in, and touch/press the connection for each of the 3 leds with your finger, and see if the 3

leds light up.

The one that lights up all 3 leds is the connection that needs to be soldered. Youtube guide on how to

correctly solder can be found here:

http://www.youtube.com/watch?v=MHNDa2Wvk8I

8 Errors/Mistakes and Recommendations

Please write me at

[email protected]

for

any errors/mistakes, or improvements that

you think would make it a better manual.

We appreciate your help and will offer discounts for your next purchase depending on

how much you contribute.

Summary of Contents for LED PAR 64 6CH LCD 181 LONG





