2 Control Modes
Stand Alone Mode
Select effects using the LCD panel
DMX
International standard DMX512 signal control
Sound Active
With Sensitivity Knob
3 LCD Control Panel
1- Menu
Push button to Navigate through the menu.
This button does
NOT
keep you in the MAIN
MENU but it will browse all the menu options
WITHIN
the MAIN menu OPTION that was SAVED last
time it was turned on. There are two MAIN menu options, so you are either in one or the other.
See
Section 4
for menu structure and you will understand it better.
2-
Page Down
Use this button to navigate or set value when you have navigated to the right screen.
3- Page Up
Use this button to navigate or set value when you have navigated to the right screen.
4-
Enter/ESC
Confirm your selections or settings
Find out which mode this light is in, and switch between modes.
Push Menu button until you see either ADDR or nASt.
If you see ADDR, you are in DMX mode, Otherwise you are in Stand Alone mode.
To Change from DMX mode to Stand Alone mode:
1, Go to screen ADDR by pushing MENU button
2, push Up/Down button to get nASt.
3, push Enter to Confirm
