Safety Information
Caution
Caution
Read the paragraph Overvoltage on possible mechanical damage that may oc-
cur if an external brake resistor is missing or improperly dimensioned.
2 Product Description
The TP50, TP80, TP130 and TP350 devices complement the
TSD80, TSD130, and TSD350 drive series.
TP devices contain:
A three phase rectifier, in-rush current limiter
A large capacitance to recuperate motion energy
An internal brake resistor or an optional connector for an
external brake resistor to limit the DC-Bus voltage
DC-Bus output connectors for up to four drives
Connectors for two cooling fans
Status output and Status LED
The devices also include the following protective functions:
Energy dissipation by internal or external brake resistor
Short circuit protection of brake resistor
(internal and external)
Short circuit protection on DC-Bus on power up
Input overvoltage protection on power up. The device will
actively limit the DC-bus voltage using the brake resistor
but will not supply current in this state
Over temperature of the device
Phase fail detection (3-phase supplies only)
Caution
Caution
TP devices have no voltage transformation built-in! Refer to Chapter for the allowed input
voltage range. In most cases an external transformer or SMPS is needed in between main
supply and TP.
HWTP50-TP350_E_HardwareManual_EP008
2022-08-08
4
/
20