3
RECEIvER
Dual Function Receiver Light
(“Fuel Gauge”)
Collar activation indicator:
• Indicates that the collar is switched on by flashing twice per second with a four second gap between flash sequences.
When a stimulation button is pressed this light indicates battery charge and will be:
• Steady green when the batteries are fully charged
• Steady amber when the batteries are partly discharged.
• Steady red when the batteries need charging very soon.
• Rapid red flashing means the batteries are completely
dead and the unit will not function.
(Note: It takes 20 seconds after the collar is switched on for the light
to register the battery charge level.)
Collar Strap Retaining Loops
(“Belt Loops”)
The receiver has three belt loops for secure collar strap attachment
and retention with no gap. Do not use the collar strap “belt loops”
for attaching a leash. They are not designed for this use.
Battery Pack Access Screws
Remove these two screws to remove the battery pack for replacement.
Position the new pack in place and replace the screws.
These screws are also removed to install the Tracer
TM
light accessory.
Very important: Do not remove or tamper with any internal labels that are visible when the battery pack is removed.
Doing so will void your warranty. The receiver product code label is a seal that maintains waterproof integrity of the receiver.
NOTE: CHARGE RECEIvER BEFORE FIRST USE.
A
B
B
B
B
C
C
C
A
