e6427rIR 03/17/17 Tri-Tech Medical Inc., 35401 Avon Commerce Pkwy., Avon, Ohio 44011 No. 99-0534
Tel. 1-800-253-8692 -or- 440-937-6244 Fax. 440-937-5060
Web site
E mail address:
8
Tri-Tech
Medical Inc.
Operation Maintenance Instructions
for Sleep Lab Panels
Flowmeters
Accuracy:
±
10% of the indicated flow.
Operating Temperature:
69°F (20.6°C) to 71F° (21.6° C)
Storage Temperature:
-40°F (40°C) to 140°F (60° C)
Max Humidity:
95 %
Note:
Storage / Transport outside the specified range may cause damage to the flow meter.
Specifications are subject to change without notice.
Operating Instructions
Note:
Tri-Tech Medical, Inc. recommends the use of kink proof patient tubing.
1.
Be sure Dial Flowmeter is in the “OFF” position.
2.
Connect the Dial Flowmeter to a 50 psi (3.4 bar) Oxygen Source.
3.
Set the flow by aligning the Indica
ting Pointer ▼ to the desired flow.
Note:
The accuracy of flow will be adversely affected by any variation of inlet pressure, ambient
temperature or outlet resistance from rated values.
L
WARNING
•
Read this user manual before installing or operating the Dial Flowmeter.
•
There is NO FLOW between settings. The Indicating Pointer ▼must point to a specific number on the
dial to obtain flow.
Caution
ONLY
use appropriate indexed fittings to connect the Dial Flowmeter to appropriate source. Use
Oxygen
connections for oxygen flowmeters and use
Air
connections for
Air
flowmeters.
Cleaning / Maintenance
1.
Disconnect all connections before cleaning.
2.
Clean exterior surfaces of the Dial Flowmeter with a cloth dampened with water.
3.
Wipe dry with a clean cloth.
4.
Store the Dial Flowmeter in a clean area free from grease, oil and other sources of contamination.
Caution
•
DO NOT
immerse the Dial Flowmeter in any kind of liquid. This will cause damage to the Dial
Flowmeter and will void the warranty.
•
This Dial Flowmeter is not field serviceable.