Install the Belt:
Locate the rubber belt and install it around the sub platter first and then around the pulley.
The upper position of the pulley is for 33 rpm and the lower one is for 45 rpm.
Turn the power switch on and ensure that the
pulley turns smoothly. Turn the turntable off
before moving on to the next step.
The platter is not installed on your TA-0.5 it is
packaged separately within your box. Locate
the platter and gently install it over the spindle.
use &
guidelines
Sub Platter
33 rpm
Pulley
45 rpm
Locate the removable spindle cover and insert it over the spindle on the table.
The spindle cover is removable to further isolate the record and the Platter from
external vibrations.
Install the Interconnects:
Ensuring you have muted or turned off your sound system, locate the Interconnects (or use
your own interconnects) and connect them to the turntable ensuring the direction arrow for
the cables is flowing away from the turntable. Then connect the turntable interconnects into
the input of your phono/pre-amplifier ensuring you match the R and L inputs/outputs.
