C
DETAIL C
SCALE 1 : 10
3) Flip the unit over and adjust each leg
to the desired height keeping the platform level.
Shorter platforms may be adjusted between 5"-8".
Taller platforms may be adjusted between 9"-14".
Warning: Adjusting the platform outside of these
parameters can result in failure under capacity.
4) Remove one side of backing and
place the provided tape in the following
orientation. (Quantity 9)
5) Remove the second backing and
Install the Ergo matting evently above
the platform.
2) Flip the unit over and install
crutch tips on each leg by applying
pressure until crutch tip is fully seated.
One per leg (Quantity 4)
To connect two or more platforms
together, use the 5/16" hardware provided.
You will need two 1/2" wrenches (not
provided)to tighten the fasteners.
All legs should be adjusted to the ground to
evenly destribute the capacity and create a
level, stable work platform.
