12
water instead of steam.
Do not subject the product to strong impacts, serious
damage may result.
Do not use the ironing system as a heating unit.
Always unplug the appliance before you fill or empty the
tank.
Do not fill the tank above the maximum capacity and do
not introduce into the tank mixtures for removing stain,
vinegar, descaling agents or chemicals in general.
Always select the most suitable temperature according to
the fabric to be ironed.
The iron must be used and rested on a stable surface.
When placing the iron on its iron stand, make sure that
the surface is stable.
Iron should not be used if dropped, if there are visible
signs of damage, if it loses water during operations.
CAUTION: the iron plate gets very hot during use,
be careful not to touch it, serious risk of burns. Do
not put your face near the steam coming out the iron
plate.
MOD. G40017
1)
Spray nozzle
2)
Water fill opening
3)
Steam adjustment lever
4)
Steam button
5)
Spray button
6)
Handle
7)
Power cord
8)
“Soleplate temperature” indicator light.
9)
Base
10)
Soleplate Temperature Selector Dial
11)
Water tank
12)
Soleplate
13)
Self-clean button
FILLING THE TANK
The filling operation must be performed only when the plate has been cooled down and after having
unplugged the unit from the electrical outlet.
We recommend the use of
demineralized water
to prevent
excessive fouling (not covered by warranty).
1)
Place the steam control knob (3) on “0”.
2)
Open the water tank lid (2).
3)
Raise the tip of the iron to avoid any leak of water during the operation.
4)
Enter the water up to the maximum level indicated with "
MAX
" on the tank (11).
5)
Close the lid (2).
TEMPERATURE SETTING
The following table provides a guideline on how to adjust the thermostat according to the international
symbols printed on the clothing labels or according to the type of fabric.
