TREVIDEA CEA-09-01, User Manual

Page: 12 / 40

11
Do not subject the product to strong impacts, serious
damages may result. Do not use near or under flammable
materials (like curtains), heat, cold spots and steam.
GENERAL INFORMATION
At first use, remove the protective film of the plate; due to
the presence of a protective oil and residues left over from
the film, the plate could emit some smoke. After few
uses, the smoke will disappear. When using the product
for the first time, repeatedly use the steam (away from
clothes) and try to use the iron on a worthless piece of
cloth to remove any manufacturing residues that may
stain or scratch the fabric.
Do not use the ironing system as a heating unit. When not
in use, the iron must be stored upright.
Keep the power cord free from knots and tangles. Do not
wrap the power cord around the iron.
It is recommended not to use too frequently the button
called "steam shock" (steam shot), because it decreases
the temperature of the iron plate which may cause drips of
water instead of steam.
Always unplug the iron before you fill or empty the tank
Do not fill the tank above the maximum capacity and do
not introduce into the tank mixtures for removing stain,
vinegar, descaling agents or chemicals in general.
Always select the most suitable temperature according to
the fabric to be ironed.
The iron must be used and rested on a stable surface.
When placing the iron on its iron stand, make sure that
the surface is stable.
The iron should not be used if dropped, when there are
visible signs of damage, or if it loses water during
operations
CAUTION: the iron plate gets very hot during use, be
careful not to touch it, serious risk of burns. Don’t put
your face near the steam coming out the iron plate