12
XF 3200 PRO
ENGLISH
- LED indicator light(24) RED: the device and 'properly connected with the power cord and battery and' being charged.
- LED indicator light(24) BLUE: Charging finished, the battery is charged.
Caution:
Do not connect the appliance to sockets with a voltage other than that indicated.
BASIC FUNCTIONS
POWER ON/OFF
Press the main switch POWER ON/OFF(5) to turn ON and use the device with its internal battery.
Press again the main switch POWER ON/OFF(5) to switch off the device or charge the battery.
STAND-BY
You can switch the system to standby mode using the
button
(1) on remote control;
Caution:
- In Stand-by mode, the upper knobs and the battery icon on the display remain lit.
- We remember leaving the unit in stand-by function the battery discharges faster than using the POWER ON/OFF switch(5).
M
ODE SE
TTING FUNCTION
To change the mode function, press more 'times the MODE key(17) on the unit or press the MODE button(2) on the remote control
to select: AUX (the display shows AUX), BLUETOOTH (the display BLUE), Radio (the radio frequency appears on the display),
USB/SD (only if the USB/SD socket(8 and 9) is connected to a memory, the display shows for a few seconds "USB" or "SD").
ADJUSTING THE VOLUME
1. Turn the VOLUME knob(21) to increase or decrease the overall playback volume or use the buttons(9) and (11) on the remote
control for fine adjustment;
2. Turn the M. VOL (10) knob to adjust the volume of the signal at the MIC input(2);
3. Turn the GT.VOL dial(3) to adjust the volume of the signal at the GUITAR input(1).
EQUALIZER
This unit has a pre audio equalization system set. Press the EQ button(13) on the unit or the (3) button on the remote control to
select one of six available audio equalizers, and that best suits the sound playback.
SETTING TONE TREBLE AND BASS
Turn the TREBLE knob(6) to adjust the treble.
Turn the BASS knob(7) to adjust the bass.
ECHO EFFECT
Turn the ECHO knob(4) to increase or decrease the echo effect on the inputs MIC.
Note:
the echo only works on microphone inputs.
DISCO-LIGHT EFFECTS
To turn on the Disco-Light effects on the speakers, press the LED button(26) on the back.
To turn off the effect Disco-Light, press again the LED button(26).
RADIO FM FUNCTION
AUTO MEMORY
1. Fully extend the antenna(22);
2. Turn on the unit and press repeatedly the MODE key(17) on unit, or the MODE(2) on remote control and select RADIO function
(the display will show the frequency);
3. Press the
(19) button on the unit or the key(5) on remote control to activate the auto memory (the radio starts an automatic
search radio stations and saves them automatically). The station's number stored depends on the radio signal in your area.
During the search, press
(19) button on unit or the the key(5) on remote control to stop recording;
4. Use the
:
/CH+/VOL+
(20) o
9
/CH-/VOL-
(18)
on unit, or
:
CH+(10) and
9
CH-(4) on
the remote control to listen radio
stations saved in memory;
5. To call the number of a preset station using the number keys(25) on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
Summary of Contents for XF 3200 PRO
Page 39: ...39 ...
