Trevi LTV 3202HD, Instruction Manual

Page: 42 / 68

42
LTV 3202HD
17
USING THE REMOTE CONTROL
BATTERY REPLACEMENT
CAUTION : Danger of explosion if battery is incorrectly replaced.
NOTES
WARNING :
·
Point the remote control at the remote sensor located on the unit.
· When there is a strong ambient light source, the performance of the infrared remote sensor
· may be degraded, causing unreliable operation.
When the batteries become weak, the operating distance of the remote control is greatly
reduced and you will need to replace the batteries.
· If the remote control is not going to be used for a long time, remove the batteries to avoid
damage caused by battery leakage corrosion.
·
Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or
rechargeable (NICKEL-CADMIUM) batteries.
· Always remove batteries as soon as they become weak.
·
Weak batteries can leak and severely damage the remote control.
Do not dispose batteries in a fire. Batteries may explode or leak.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Remote control setup
TO INSTALL THE BATTERIES
1. Open the battery door 2.Insert 2"AAA"batteries.
LTV 3202HD English
ENGLISH