Trevi HCX 1200 BT, User Manual

Page: 11 / 36

11
HCX 1200 BT ENGLISH
4
REMOTE CONTROL OPERATION
To operate the unit with the remote control, point the
remote handset at the remote sensor on the front panel
and press the appropriate button on the remote handset.
The remote works best within a range of 6 ~ 7 meters from
the front panel and on an angle of 30 degrees. Bright
sunlight or room light conditions can interfere with the
remote control. If the remote operation is unsatisfactory or
stops working entirely, first try replacing the remote
batteries, then try reducing the room lighting conditions.
POWER SOURCE
This unit is designed to operate on AC electrical systems.
AC OPERATION
Plug one end of the power cord into the AC power input on the unit; plug the other end into a
household AC outlet.
BASIC FUNCTION
TURNING THE UNIT ON/OFF
Connect the Left and Right speaker cable to the L/R socket and connect the FM wire to the FM
ANT. socket on the rear cabinet. P
ress the STANDBY button on unit or remote control to turn the
unit on or off.
NOTE:
In CD/USB/BLUETOOTH or AUX mode, when the unit is not providing the main
function for 15 minutes, the unit will automatically switch into standby mode. Press the
STANDBY button to turn on the unit again.
ESD hints
– The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
SETTING THE FUNCTION MODE
To change the function mode,
press the FUNCTION button on the unit (RADIO / CD / USB / BT /
AUX).
ADJUSTING THE VOLUME
Rotate the
VOLUME
dial on unit or
VOL.+/VOL.-
keys on remote control to increase or
decrease volume.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, Press the
EQ/ID3
button on unit or remote control
during playback to select a setting that best matches the music style: FLAT, CLASSIC, ROCK,
POP and JAZZ.
ID3 System