Treston
• 156 Bluffs Court, Canton, GA 30114
Tel. 800.437.6772 • Fax 770.720.6584 • [email protected] • www.treston.us
ASSEMBLY INSTRUCTIONS
Cornerstone Bench
905998
10/17/19
5 (7)
4,5 x 20
4,5x20
8
ASSEMBLY INSTRUCTION
905998
2019-11-07
3 (3)
LAMINATE
Treston laminate tops assembled with wood screws provided.
PHENOLIC
DO NOT USE provided screws from the hardware pack provided with the table.
These screws are for
laimate work surfaces only.
Treston phenolic tops can be assembled in 2 ways:
• Mechanical fasteners
- Screws to be provided by the installer. Pre-drill a pilot hole in the bottom of the work
surface, taking care to keep from penetrating through the top. The pre-drilled hole should be the same length as
the screw shaft. The screw should be slightly larger in diameter than the pilot hole. Use a coarse threaded screw,
wood or machine.
• Adhesive
- Provided by the installer. Use 100% silicon. Apply several “spots” or a continuous bead to the top of
the table frame. Position the work surface as centered on the frame and let cure for 12 hrs at room temp.
