TCD-108
6686
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,/fax:+48 58 56 300 80 www.ega.com.pl
23
avoid contacts with the liquid. In case of accidental contacts with the liquid wash
the affected locations with water. When liquid penetrates eyes, seek also for
medical assistance.
The liquid that leaks from batteries may
be a reason for irritation or
scalds.
9. When the battery unit is not in use keep it far away from metallic items such as
paper clips, coins, keys, nails, bolts or other metal things that may short the
battery terminals.
Shorts of battery terminals may cause burns or fires.
10. Never throw batteries to fireplaces.
11. Never charge a damaged battery.
The batteries are designed for repeatable charging for many times. Upon the
battery lifetime expires the battery must be disposed in accordance with
environmental regulations. Discharge the battery first top the empty state and
remove from the electric tool. Hand over to an organization that deals with utilization of
batteries or take it back to the shop where the tool had been purchased.
Using the hart
1.
Use only dedicated power adapters to charge the battery.
Application of a power
adapter dedicated to charge another type of the battery unit poses a risk of fires.
2. The supplied charger should only be used for charging batteries that are supplied
together with it.
Charging other batteries may cause breaking and
disintegration of the
battery, bodily harm, or fire.
3. Do not disassemble the charger.
4.
The charger is designed exclusively for indoor use.
It must not be exposed to water
or moisture.
5. Charge only in an ambient temperature between 15-25 degrees.
6.
Do not insert metal objects of any kind into the charger.
Application sand construction
The device is dedicated to drive in and out screws, drilling boreholes in such materials as
steel, wood, plastics, etc.
The tool must not be used for work requiring a professional tool.
Any use of the device that is not in observance with the above- mentioned purpose is
forbidden, leads to the loss of warranty, and relieves the manufacturer from responsibility
for the resulting damage. Any modifications of the tool by the user relieve the manufacturer
from responsibility for any damage and injuries to the user and the surroundings.
Despite using the tool according to its intended application it is impossible to eliminate
certain residual risk factors. Considering the tool construction the following risks may occur
Summary of Contents for 6686
Page 2: ......
