TRH-40/1200
4662
“EGA" Spółka z o.o. Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel,fax:+48 58 56 300 80 www.ega.com.pl
19
contact with hidden wiring or its own cable. Contact with a live conductor will cause current
to flow through the metal components of the device, resulting in paralysis of the operator.
2.Use additional handle, which is attached to the device. Loss of control can cause personal
injury.
3.When drilling must use means of personal protection such as goggles or a face mask, ear
protection, protective clothing and gloves. If the drilling waste is generated, you should wear
a dust mask.
4.The workpiece must be secured in a fixture or vise. Unstable support may lead to
jamming of the drill, which will result in loss of control or injury.
5.Do not just push a drill that resulted in a dismissal of the motor. The drill must be able to
cut the material. This allows you to get better, the quality of drilling, and the tool is less
exploited.
6.After drilling, do not touch the drill. The drill is then extremely hot.
7.Use only accessories work that are in good condition.
8.Never reach under the workpiece.
9.Periodically check the tightness of all nuts, bolts and other fasteners.
10.In the workplace, do not leave your rags, fabrics, wires, cords, etc .. In a workplace must
not be things that could be tripped over.
11.After some time the carbon brushes are subject to wear and see them bigger sparks.
This means you need to replace the brushes, and the lack of exchange will damage the
engine.
WARNING!
The device is used for indoor work. Despite the use of a safe structure from
the very foundation, the use of protective measures and additional protective measures,
there is always the risk of residual
injury during work.
Features
This rotary hammer drill is suitable for
drilling and hammer-drilling concrete,
stone, masonry and light chiselling
work around the house. Use only
suitable
accessories
(note
manufacturer’s instructions). All other
applications are expressly excluded.
(Fig.1).
1.SDS-Max chuck
Summary of Contents for 4662
Page 2: ......
