Tresco Radar Overlay - Operator’s manual
Page 3
Introduction
We would like to thank you for choosing the “Tresco Radar Overlay” system. The
Tresco Radar Overlay product enhances a vessel’s system radar picture by
underlaying Tresco digital charts. This operating mode conforms with “navigation
mode” as specified in the Inland ECDIS standard.
Attention !
Inland ECDIS equipment like this, which is able to work in navigation mode (with radar
overlay), may only be installed and configured by authorized companies. The chapter
“Installation” in this manual gives only a system overview and an interconnection diagram to
know the main parts of the whole system. The complete installation is explained in a separate
installation manual.
Any parts of the system (PC, Monitors, DGPS- or GPS-Receivers or –Compasses) may be
replaced only by original replacements authorized by Tresco Engineering.
It is important that you read this manual
completely
before you start to install and
use your Tresco Overlay.
