TREPEL CHALLENGER550 Operation Manual Download Page 20

Page: 20 / 156

General Information and Operating Instructions

PUSHBACK TRACTOR CHALLENGER550

Page 14

1-1

Jan 28/19

Danger of falling!

There is a danger of falling when climbing on the grating of the CHALLENGER550.

Falling from the CHALLENGER550 can result in death or serious injuries.



Only use secured mounting ladders.

Crush hazard!

Persons can be caught and crushed by steering movements of the wheels in the wheel case when
reading the hydraulic oil level in the viewing window.

The crushing can lead to death or serious injuries.



Inform operating personnel of the inspections to be carried out.



Switch off the motor of the CHALLENGER550 before inspection work.



Put up warning sign, "Service work! Do not switch on!".

Splashing hot coolant!

The cooling system is pressurized. When opening the cooling system, hot coolant may splash out.

The splashing coolant can scald the skin or the eyes.



Only open the cooling system when the coolant temperature is below 90 °C.



Unscrew the cap slowly and allow the pressure to escape completely before opening.



Wear suitable protective gloves, clothes, and goggles when handling coolant.

Danger of poisoning!

The coolant in the cooling system contains poisonous substances.

There is danger of poisoning when you swallow coolant.



Never swallow coolant; wash your hands after contact with coolant.



Never pour coolant into drinking containers.

Loosening of wheel nuts!

Before initial operation or after a wheel change, the wheel nuts can loosen due to material settling
and lead to serious accidents.

Persons can be seriously injured or even killed because of serious accidents.



Be sure to retighten all wheel nuts with the specified torque before the initial operation or after
the wheel exchange.



Retighten the wheel nuts with the prescribed tightening torque again after the first laden jour-
ney, at the latest after 24 operating hours.

Property of American Airlines

Summary of Contents for CHALLENGER550





























































































































































Search results

Summary of Contents for CHALLENGER550

Reviews:

Related manuals for CHALLENGER550

Brands by name

Popular brands

TREPEL CHALLENGER550, Operation Manual

Search results

Summary of Contents for CHALLENGER550

Reviews:

Related manuals for CHALLENGER550

Brands by name

Popular brands