Section 4 / Regulatory Compliance
8
Manual | Rev. 2 | Doc. No.: 7771
Regulatory Compliance
DECLARATION OF CONFORMITY
FCC
This device complies with part 15 of the FCC rules as a Class A device. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device
must accept any interference received, including interference that might cause undesired
operation.
CE
This equipment complies with all applicable European Union (CE) directives if it has a CE marking.
For this device to remain CE compliant, only CE compliant parts can be installed, and proper
cables and cabling techniques are required.
AGENCY APPROVALS
All standards should be at applicable revision levels at time of test.
Electromagnetic Emissions (EMI)
Designed to FCC Class A as a minimum.
Designed for CE Conformity to EN55032:2015, EN55035:2017, EN61000-4-2:2008, EN61000-
4-3:2010, EN61000-4-4:2012, EN61000-4-5:2014, EN61000-4-6:2013, EN61000-4-11:2004
This product will be approvable for MIL-STD-461G to system test methods RE102, and
CE102.
Safety
This product will be UL approvable for safety concerns and designed for UL 60950-1 and
62368-1.
Environmental
This product will be approvable for MIL-STD-810G High and Low-Temp Operating and
Storage system testing to test methods 501.5 and 502.5, Procedures II and I
This product will be approvable for MIL-STD-810G Altitude Operational and Storage system
testing to test method 500.5, Procedures II and I.
