blind corner base panel
www.trendstyle.com.au
Step 2
Follow these instructions to fit
your doors and panels.
Before you get started
Make sure you leave plumbing and electrical work to qualified trades
people. Never try this yourself.
Gloss vinyl doors & panels are protected with a top clear wrap that
needs to be removed. Depending on application of the panel, this may
need to be removed prior to installation.
All holes that aren’t already pre-drilled should be drilled prior to
screwing using a No 12 countersinking drill bit.
Hardware needed
Tools you will need
To put your trendstyle cabinets together you will need the following tools.
Make sure you always use safety gear like a mask, ear muffs and
glasses when using tools.
page 4
A
14mm
wood screws
x 16
B
90° angle
bracket
x 8
Cordless drill with:
•
Number 2 screw tip
•
4mm drill bit
•
Number 12
countersinking drill bit
Tape
measure
Pencil
Clamps
Safety
gear
Adjustable
square
Spirit level
(900mm recommended)
