Internet Server User’s Guide
Configuration
Variables
28
Default Value:
0.0.0.0
Description:
Dial-up connections should use address
0.0.0.0 if the IP will be dynamically assigned at each connec-
tion. Otherwise, enter the IP address assigned by your ISP.
Modem AT Command
Options (sub-variables):
♦
Initial String:
<AT &F> (default)
♦
Dial Prefix String:
<ATDT> (default)
♦
Hangup String:
<~~~+++~~~ATH0> (default)
Description:
Modem AT commands are used to configure
and operate the modem when it is necessary to control set-
tings such as the speaker volume, line modulation, or
handshaking protocol.
Note:
See your modem user’s guide for information
about initial string settings and other modem
commands.
Note that the initial string modem command must set the follow-
ing:
1.
Fixed baud rate (i.e., serial data rate adjustment dis-
abled).
2.
Data Carrier Detect (DCD) to follow carrier signal
status.
3.
Data Set Ready (DSR) to on while the modem is on.
Summary of Contents for TW100-W2
Page 60: ......
