Setup
9
Configure or use any of the following:
•
PC Database
•
Remote Admin
•
Routing (RIP and static Routing)
•
Upgrade firmware
•
Enable/Disable UPnP Support
Chapter 9:
Other Features and Settings
Where use of a certain feature requires that
PCs or other LAN devices be configured, this
is also explained in the relevant chapter.
Configuration Program
The TW100-BRV304 contains an HTTP server. This enables you to connect to it, and config-
ure it, using your Web Browser.
Your Browser must support JavaScript
. The configuration
program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure the TW100-BRV304, please ensure that:
•
Your PC can establish a physical connection to the TW100-BRV304. The PC and the
TW100-BRV304 must be directly connected (using the Hub ports on the TW100-BRV304)
or on the same LAN segment.
•
The TW100-BRV304 must be installed and powered ON.
•
If the TW100-BRV304 's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRV304 is allocated a new
IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the TW100-BRV304 will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of the TW100-BRV304, you can accept the
desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in
My
Network Places
(previously called
Network Neighborhood
).
•
Double - click the icon for the TW100-BRV304 (either on the Desktop, or in
My Network
Places
) to start the configuration. Refer to the following section
Setup Wizard
for details
of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the TW100-BRV304:
1. After installing the TW100-BRV304 in your LAN, start your PC. If your PC is already
running, restart it.