•
The
Status
LED should flash, then turn Off. If it stays on,
there is a hardware error.
•
For each LAN (PC) connection, one of the LAN LEDs
should be ON (provided the PC is also ON.)
•
The
WAN
LED should be ON.
o
Configuration
1. Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the TW100-
BRM504's DHCP Server.
2. Start your WEB browser. In the
Address
box, enter the
following:
HTTP://192.168.0.1
3. When prompted, use the following username and pass-
word.
•
User name:
admin
•
Password:
password
4. The
Setup Wizard
will run automatically.
5. Step through the Wizard until finished. Refer to the data
from your ISP, and the table below, to ensure your
choices are correct.
Connection Type
Data required.
Dynamic IP Address
Usually, none.
Specified (Fixed)
IP Address, or
IPoA (IP over ATM)
IP Address allocated to you, and
related information.
PPPoE, PPPoA
Login name and password.
If using a fixed IP address, the IP
address and related information.
Page
2
